Lateral Large Tie Rod Corrugated Compensator(Angular Expansion Joints)

Product Description

The TDL lateral large tie rod corrugated compensator can compensate for the lateral displacement of the curved pipe section and the angular displacement of a small value. It is usually not used to compensate for the angular displacement. The large tie rod corrugated compensator is composed of two bellows, a large tie rod and other parts. It can absorb the lateral displacement in any plane of the pipe system. The displacement spherical nut rotates around the spherical washer, and the pull rod also has the ability to withstand internal pressure and thrust. The compensator is composed of two bellows, a long and middle indirect pipe, and a large tie rod. The large tie rod corrugated compensator can absorb the lateral displacement in any plane of the pipe system. The displacement spherical nut rotates around the spherical washer, and the pull rod also has the ability to withstand internal pressure and thrust.

Purpose: The lateral large tie rod corrugated compensator can compensate the lateral displacement and angular displacement of the curved pipe section.

Model: DN100-DN5000 produced by our company

Pressure level: 0.1Mpa-2.5Mpa

Connection mode: 1. Flange connection type 2. Takeover connection type

Lateral compensation: according to user requirements

The pull rod of the corrugated compensator plays a regulating role at the same time, to prevent the additional blind force caused damage to the bellows of the corrugated compensator, and the pull rod can not be removed after the installation is completed.Before installation, it is necessary to check with the compensator manufacturer about the installation method of the corrugated compensator.